Which to install first?
Hardwood flooring or kitchen cabinets? This
discussion is probably one of the most
often disagreed subjects with hardwood floors,
next to using felt paper or rosin paper. We’ll
look at it from two different angles and let
you decide.
Installing Floors Before Cabinets
By installing the floors first and cabinets
afterwards there will be no need for using
trim moldings against toe kicks unless the
floor itself is far out of whack.
But...cabinet installers use levels, hardwood
installers do not. Occasionally after the
cabinets are installed, one side of the
cabinet may be higher than the other
side. This can be taken care of if the trim
carpenter scribes the toe kick to the contour
of the finished floor. But some lower grade
cabinets do not have separate toe kicks.
Another benefit of installing the floors first
will be possible design changes at a later
date. A new kitchen remodel may bring in
smaller or larger cabinets, and they may be
placed in different positions. With the floor
running under the entire area gaps will not
appear as they will be by installing the
flooring after the cabinets.
But one has to wonder. How often do people do
kitchen remodels? In most cases the original
owner is long gone when a remodel comes
around. Why is it your concern? The new owner
will probably do something different anyway.
Another thought is how hardwood floors change
color. Let's say the floor has been covered
for 15 years. Once the older cabinets are
taken out some hardwoods will show an extreme
color difference. You will swear it's not the
same. These color variations cannot be sanded
out either.
One major disadvantage of installing
the flooring first is damage caused by the
actual cabinet installation. However having
seen these situations numerous times I've
found more damage is incurred to floors when
cabinets are installed afterwards.
Protecting floors are a
great option while the cabinet guy is working,
but plain old cardboard, or kraft paper does
not protect it enough. This is especially true
with prefinished hardwoods and can be a
concern with unfinished that still needs to be
sanded and finished. Cabinets have to be
carried in. Cabinets have to be set down
before they are ready to lift and install.
Sometimes they are set down on a corner, dings
happen. Screws get lost and stepped on.
Masonite board is ideal for covering floors.
Another drawback with this procedure is doing
hardwood repairs when the flooring runs under
cabinets.
Installing Cabinets Before Floors
Cabinets before floors offers both advantages
and disadvantages as well. The biggest
drawback may be getting
appliances removed
should they need to be repaired. This only
affects dishwashers for the most part as other
appliances are often set into recesses that
can be moved in and out easily.
Ordinarily dishwashers are installed before
hardwood floors. One way to combat a potential
locked in appliance dilemma is by installing
plywood (same thickness as flooring) in the
area under the dishwasher. Often without
planning, these appliances can get locked in
when the hardwood guy is done installing the
floor. This is more common with solid 3/4 inch
floors opposed to thinner engineered products.
Possible damage to the
cabinets during the hardwood installation is a
possibility. However, having seen these
situations numerous times I've found more
damage is incurred to floors when cabinets are
installed afterwards. |